Wood construction screw WIROX

Dimensions
Quantity
  • Rapid, safe fastening with low effort required (more fastening with one battery charge)
  • Significantly reduced screwing-in torque and lower splitting
  • Use: Timber construction, wood cross section reinforcement and wooden connections

This special drive is a so-called hexalobular internal. Compared to less precise-fitting drive types like Phillips or cross recess, the contact surface is many times larger with our T-STAR plus, and the T-STAR bits are always positioned optimally in the screw head. The maximum, precise force transmission from the screwdriver to the screw that results from the use of T-STAR plus thus enables simple and ultra-fast work with much more efficiency than with other drives. What this means for you: No more annoying bit slips from the screw head – you can take care of serial fastening in no time at all!

Unlike the washer head, which transfers the tensile forces of the screw onto a larger area of the wood via its large underside, the narrow cylindrical head does not need to perform this task at all. With its size, which offers just enough space for the T-STAR plus drive, the cylindrical head can be completely countersunk into the wood, thus enabling simple, virtually invisible screw connections. The tensile forces exercised on a screw in wood construction are completely transferred to the wood via the full thread of the cylindrical head screws. If cylindrical head screws are installed horizontally, for instance decking screws on wooden decking, they can only be inserted flush in order to prevent water from gathering in the screw hole and damaging the wood. What this means for you: Even heavy-duty wood connections can be virtually invisible!

In contrast to the partial thread, the full thread on most of our full-thread screws covers the entire – or most of – the screw length from tip to head. The more thread turn a screw has, the greater the tensile and compressive forces that can be absorbed by these screws. We make particular use of this in structural wood construction, where our full-thread screws are called upon for heavy-duty wood connections. What this means for you: Wood connections with full-thread screws offer maximum reliability when it comes to resilience, and there's no need to use any ugly zinc-plated fittings!

The CUT point on our SPAX screws enables the ultra-fast and effective insertion of our wood screws without pre-drilling. In combination with the serrations, the arrow-shaped CUT point reduces wood splitting and tearing. The CUT point also enables extremely precise and sturdy setting of the screw tip on smooth surfaces. What this means for you: You can skip an entire work step, since pre-drilling is no longer required for most woods. Saves both your screwdriver battery and your own energy – no more annoying slipping on smooth wood and derived timber products.

Effective corrosion protection is a must for screws used for outdoor structures not exposed to the elements. For this, SPAX has developed the WIROX coating, which far outdoes conventional galvanisation in terms of both protection and durability. Our WIROX-coated screws are significantly more resistant to mechanical stress than their counterparts with chromate conversion coating. No chromium(VI) is used for WIROX, which means that even after years in an area not directly exposed to the elements, the screws are not only just as resilient, but are entirely environmentally friendly, too. Our WIROX screws are the ideal choice for all open structures without direct exposure to the elements, such as carports and pergolas. For areas with extreme weather exposure, such as decking, we continue to recommend our stainless-steel screws. What this means for you: When you use our corrosion-protected screws outdoors, you can be safe in the knowledge that your structure is well fastened – in outdoor areas not directly exposed to the elements, WIROX keeps our screws statically rigid and reliably protected over many years. So there's no need for visual inspections every year!

The typical SPAX T-STAR plus drive is a so-called hexalobular internal. This shape increases the contact surface of our T-STAR plus and ensures optimal positioning for the T-STAR plus bits in the screw head. By enabling maximum force transmission from the screwdriver to the screw, T-STAR plus guarantees simple and ultra-fast work with much more efficiency than with other drives.

Unlike the partial thread, the full thread spans the entire screw length. The more thread turn a screw has, the greater the tensile and compressive forces that can be transferred by these screws to the wood. Our full-thread screws are predominantly used for heavy-duty wood connections.

The CUT point on our SPAX screws enables the ultra-fast and effective insertion of our wood screws without pre-drilling. In combination with the serrations, the arrow-shaped CUT point reduces wood splitting and tearing. The CUT point also enables extremely precise and sturdy setting of the screw tip on smooth surfaces.

With WIROX, SPAX has developed a coating that is far superior to galvanisation when it comes to corrosion protection. No chromium(VI) is used for WIROX, which means that even after years in an area not directly exposed to the elements, the screws are not only just as resilient, but are entirely environmentally friendly, too. WIROX screws are the ideal choice for all open structures without direct exposure to the elements, such as carports and pergolas. For areas with direct weather exposure, such as decking, we recommend our stainless-steel screws.

Table
Document Type Format
Please select the desired dimensions and quantity to see information here.

This special drive is a so-called hexalobular internal. Compared to less precise-fitting drive types like Phillips or cross recess, the contact surface is many times larger with our T-STAR plus, and the T-STAR bits are always positioned optimally in the screw head. The maximum, precise force transmission from the screwdriver to the screw that results from the use of T-STAR plus thus enables simple and ultra-fast work with much more efficiency than with other drives. What this means for you: No more annoying bit slips from the screw head – you can take care of serial fastening in no time at all!

Unlike the washer head, which transfers the tensile forces of the screw onto a larger area of the wood via its large underside, the narrow cylindrical head does not need to perform this task at all. With its size, which offers just enough space for the T-STAR plus drive, the cylindrical head can be completely countersunk into the wood, thus enabling simple, virtually invisible screw connections. The tensile forces exercised on a screw in wood construction are completely transferred to the wood via the full thread of the cylindrical head screws. If cylindrical head screws are installed horizontally, for instance decking screws on wooden decking, they can only be inserted flush in order to prevent water from gathering in the screw hole and damaging the wood. What this means for you: Even heavy-duty wood connections can be virtually invisible!

In contrast to the partial thread, the full thread on most of our full-thread screws covers the entire – or most of – the screw length from tip to head. The more thread turn a screw has, the greater the tensile and compressive forces that can be absorbed by these screws. We make particular use of this in structural wood construction, where our full-thread screws are called upon for heavy-duty wood connections. What this means for you: Wood connections with full-thread screws offer maximum reliability when it comes to resilience, and there's no need to use any ugly zinc-plated fittings!

The CUT point on our SPAX screws enables the ultra-fast and effective insertion of our wood screws without pre-drilling. In combination with the serrations, the arrow-shaped CUT point reduces wood splitting and tearing. The CUT point also enables extremely precise and sturdy setting of the screw tip on smooth surfaces. What this means for you: You can skip an entire work step, since pre-drilling is no longer required for most woods. Saves both your screwdriver battery and your own energy – no more annoying slipping on smooth wood and derived timber products.

Effective corrosion protection is a must for screws used for outdoor structures not exposed to the elements. For this, SPAX has developed the WIROX coating, which far outdoes conventional galvanisation in terms of both protection and durability. Our WIROX-coated screws are significantly more resistant to mechanical stress than their counterparts with chromate conversion coating. No chromium(VI) is used for WIROX, which means that even after years in an area not directly exposed to the elements, the screws are not only just as resilient, but are entirely environmentally friendly, too. Our WIROX screws are the ideal choice for all open structures without direct exposure to the elements, such as carports and pergolas. For areas with extreme weather exposure, such as decking, we continue to recommend our stainless-steel screws. What this means for you: When you use our corrosion-protected screws outdoors, you can be safe in the knowledge that your structure is well fastened – in outdoor areas not directly exposed to the elements, WIROX keeps our screws statically rigid and reliably protected over many years. So there's no need for visual inspections every year!

Please select the desired dimensions and quantity to see information here.

The typical SPAX T-STAR plus drive is a so-called hexalobular internal. This shape increases the contact surface of our T-STAR plus and ensures optimal positioning for the T-STAR plus bits in the screw head. By enabling maximum force transmission from the screwdriver to the screw, T-STAR plus guarantees simple and ultra-fast work with much more efficiency than with other drives.

Unlike the partial thread, the full thread spans the entire screw length. The more thread turn a screw has, the greater the tensile and compressive forces that can be transferred by these screws to the wood. Our full-thread screws are predominantly used for heavy-duty wood connections.

The CUT point on our SPAX screws enables the ultra-fast and effective insertion of our wood screws without pre-drilling. In combination with the serrations, the arrow-shaped CUT point reduces wood splitting and tearing. The CUT point also enables extremely precise and sturdy setting of the screw tip on smooth surfaces.

With WIROX, SPAX has developed a coating that is far superior to galvanisation when it comes to corrosion protection. No chromium(VI) is used for WIROX, which means that even after years in an area not directly exposed to the elements, the screws are not only just as resilient, but are entirely environmentally friendly, too. WIROX screws are the ideal choice for all open structures without direct exposure to the elements, such as carports and pergolas. For areas with direct weather exposure, such as decking, we recommend our stainless-steel screws.

Please select the desired dimensions and quantity to see information here.

Table
Please select the desired dimensions and quantity to see information here.

Document Type Format
Please select the desired dimensions and quantity to see information here.

Please select the desired dimensions and quantity to see information here.



We help with the choice of screws

Find the right screw for your project – with our screw consultant

For every challenge, SPAX has a screw that is up to it:
Find exactly the fastener your project needs with our screw consultant. With a few clicks you can find the right screw for your application.


Discover the world of SPAX


SPAX connects - our assortment at a glance



We are here for you!

Do you have questions that can only be answered personally?
 

+49 2333 799-0
 

Or use our contact page