Decking Lift 5/9

Quantity
SPAX Lift decking supports made of sturdy plastic create a load-bearing and height-compensating base for the substructure of wooden terraces. At the same time, SPAX Lift separates the substructure from the floor and thus prevents rising damp from getting into the wood. They can be adjusted in height by a simple turning movement. SPAX Lift 3.5/5 and SPAX Lift 5/9 can bear loads of up to 800 kg. Two sizes are available: With SPAX Lift 3,5/5, height adjustment between 35 and 50 mm is possible, with SPAX Lift 5/9 it is between 50 and 80 mm. Attention: When using SPAX Lift Extension, the load capacity SPAX Lift 3.5/5 and SPAX Lift 5/9 is reduced to 400 kg. This means for you: Problem-free alignment of the substructure is also possible on old decking.
The SPAX Lift terrace supports made of sturdy plastic create a load-bearing and height-compensating basis for the substructure of wooden terraces. At the same time, the SPAX Lift separates the substructure from the floor and thus prevents rising damp from getting into the wood. Each terrace support can bear loads of up to 800 kg. With SPAX Lift 3.5/5, height compensation between 33 and 50 mm is possible, with SPAX Lift 5/9 it is between 55 and 82 mm.
Table
Document Type Format
SPAX Outdoor Decking Flyer PDF
Please select the desired dimensions and quantity to see information here.

SPAX Lift decking supports made of sturdy plastic create a load-bearing and height-compensating base for the substructure of wooden terraces. At the same time, SPAX Lift separates the substructure from the floor and thus prevents rising damp from getting into the wood. They can be adjusted in height by a simple turning movement. SPAX Lift 3.5/5 and SPAX Lift 5/9 can bear loads of up to 800 kg. Two sizes are available: With SPAX Lift 3,5/5, height adjustment between 35 and 50 mm is possible, with SPAX Lift 5/9 it is between 50 and 80 mm. Attention: When using SPAX Lift Extension, the load capacity SPAX Lift 3.5/5 and SPAX Lift 5/9 is reduced to 400 kg. This means for you: Problem-free alignment of the substructure is also possible on old decking.
Please select the desired dimensions and quantity to see information here.

The SPAX Lift terrace supports made of sturdy plastic create a load-bearing and height-compensating basis for the substructure of wooden terraces. At the same time, the SPAX Lift separates the substructure from the floor and thus prevents rising damp from getting into the wood. Each terrace support can bear loads of up to 800 kg. With SPAX Lift 3.5/5, height compensation between 33 and 50 mm is possible, with SPAX Lift 5/9 it is between 55 and 82 mm.
Please select the desired dimensions and quantity to see information here.

Table
Please select the desired dimensions and quantity to see information here.

Document Type Format
SPAX Outdoor Decking Flyer PDF
Please select the desired dimensions and quantity to see information here.

Please select the desired dimensions and quantity to see information here.



We help with the choice of screws

Find the right screw for your project – with our screw consultant

For every challenge, SPAX has a screw that is up to it:
Find exactly the fastener your project needs with our screw consultant. With a few clicks you can find the right screw for your application.


Discover the world of SPAX


SPAX connects - our assortment at a glance



We are here for you!

Do you have questions that can only be answered personally?
 

+49 2333 799-0
 

Or use our contact page